This is an old revision of the document!
Start by plugging the Vizy power adapter into your Vizy.
Note: check that you're plugging the power cord into the logo side of Vizy, as shown below.
Plug the other end of your power adapter into an AC outlet. Vizy's power supply has US plugs, but can handle up to 240V, so it will work with European voltages. (If you're outside the US, only a simple plug adapter is required – no step-down voltage converter/transformer is necessary).
Turn your Vizy on by pressing the button on top. Just press and release – don't press and hold down.
When Vizy turns on it will beep and begin to initialize. The button will change colors several times, and eventually settle on a soothing light blue after about 45 seconds or so.
Vizy is now ready to accept connections!
You interact with Vizy using a standard web browser running on your computer, laptop, or phone. But first, you need to establish a network connection. You have some choices here! Choose one of three options below:
This is probably the simplest option, but it requires a wired network and a network cable. Just connect your Vizy to a BASE-T connector and it should self-configure (assuming your network has a DHCP server, which is usually the case.)
Vizy will become a WiFi Access Point (AP) upon initialization until you configure it differently. In AP mode, you can connect to Vizy directly. Bring up your computer/laptop/phone's WiFi network selector and look for a network named vizy-xxxx
where xxxx
is a semi-unique 4-digit number. Go ahead and select the vizy-xxxx
network.
The password/security key for the network is 12345678
. (Note: this is not the same as the PIN, which some network devices support.)
If something goes wrong, you can always reset the wifi connection by entering Safe Mode.
This requires some extra configuration steps. Since this is the Quick Start guide, we suggest configuring this later, but you're welcome to do so now if you wish.
Once you are connected to your Vizy via one of the possible methods above, you can point your browser to http://vizy.local
to see what your Vizy is up to. When you first visit Vizy, you'll be presented with a login screen:
Type admin
for both the username and password. Then click on Login.
Note: if you are using Windows or Linux and you don't see video in your browser as shown above, you may have an early version of Vizy's software (Version 0.0.75 and earlier). If you notice this behavior, please update your Vizy software to the latest version.
If you are using Safari in MacOS, you will need to enable WebRTC.
When Vizy initializes, it runs a default application (app). To configure which app is run, or to try any of the available apps, bring up the Apps/examples
dialog from the menu in the top right.
Note: as of software version 0.0.82, only the birdfeeder app is available. We are working hard to release more apps as soon as possible!
In the meantime, we have several simple examples that can be run. Select the example you're interested in from the Run example
dropdown menu and press the Run button to the right. You can explore the different example programs in this way.
Here are the available examples as of version 0.0.82:
The example source code is written in Python and can found in ~/vizy/examples
on Vizy's filesystem.
Depending on how you would like to use your Vizy, here are some next steps: