<< return to Vizycam.com

User Tools

Site Tools


Getting started with the telescope adapter

Vizy's telescope adapter allows Vizy to attach to a standard 1.25“ barrel commonly found on consumer telescopes. To install the adapter:

  1. Remove the existing lens. Start by loosening the set screw – use a screwdriver if necessary.

  2. Unscrew the lens by grabbing the outermost ring and rotating counter-clockwise.
    image_336.jpg image_337.jpg

  3. Screw the telescope adapter into Vizy's lens mount.
    image_402.jpg image_403.jpg

  4. Slide the telescope adapter into your telescope and tighten the set screw if necessary.
    image_404.jpg image_405.jpg
wiki/telescope_getting_started.txt · Last modified: 2022/03/04 10:35 by vizycam