<< return to Vizycam.com

User Tools

Site Tools


wiki:simple_outdoor_enclosure_mounting

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
wiki:simple_outdoor_enclosure_mounting [2021/11/06 16:45]
vizycam
wiki:simple_outdoor_enclosure_mounting [2021/11/06 17:17]
vizycam
Line 6: Line 6:
 ===== Pole-in-ground mounting ====  ===== Pole-in-ground mounting ==== 
  
-In particular, you can take a 1.5" PVC pipe and cut it to the desired length and drive it into the ground for a simple camera mount that will stay where you want it.  Angle-cut the PVC pipe (see below), which makes it easy to drive into the ground. ​ Combine with one of the camera mounts below.+In particular, you can take a 1.5" PVC pipe and cut it to the desired length and drive it into the ground for a simple camera mount that will stay put.  Angle-cut the PVC pipe (see below), which makes it easy to drive into the ground. ​ Combine with one of the camera mounts below.
  
 {{wiki:​image_504.jpg?​600}} {{wiki:​image_504.jpg?​600}}
  
-===== Hang/​cantelever ​mounting =====+===== Cantilever ​mounting =====
  
 Again by using 1.5" PVC piping, the same mounting ideas can be applied to other setups, such as mounting from the underside of a roof eave.  That is, you can use a [[https://​www.amazon.com/​CIRCOPACK-Screw-Schedule-Furniture-pieces/​dp/​B07WGWB6TY|screw-tab cap]] in combination with PVC elbows to create a mount that fits your needs. ​ Combine with one of the camera mounts below. Again by using 1.5" PVC piping, the same mounting ideas can be applied to other setups, such as mounting from the underside of a roof eave.  That is, you can use a [[https://​www.amazon.com/​CIRCOPACK-Screw-Schedule-Furniture-pieces/​dp/​B07WGWB6TY|screw-tab cap]] in combination with PVC elbows to create a mount that fits your needs. ​ Combine with one of the camera mounts below.
Line 41: Line 41:
 You can then place the cap on top of the PVC pipe.  No PVC adhesive is necessary.  ​ You can then place the cap on top of the PVC pipe.  No PVC adhesive is necessary.  ​
  
 +{{wiki:​image_518b.jpg?​600}}
  
 ===== Adjustable angle camera mount ===== ===== Adjustable angle camera mount =====
Line 46: Line 47:
 Materials needed (in addition to 1.5" PVC pipe): Materials needed (in addition to 1.5" PVC pipe):
  
 +  - 1.5" PVC cap
   - Ball head camera mount ([[https://​www.amazon.com/​gp/​product/​B08R7TSNP2|Amazon B08R7TSNP2]],​ or [[https://​www.amazon.com/​dp/​B096K1X5NG|Amazon B096K1X5NG]],​ etc.)    - Ball head camera mount ([[https://​www.amazon.com/​gp/​product/​B08R7TSNP2|Amazon B08R7TSNP2]],​ or [[https://​www.amazon.com/​dp/​B096K1X5NG|Amazon B096K1X5NG]],​ etc.) 
   - 1/​4"​-20 x 0.5" stainless bolt   - 1/​4"​-20 x 0.5" stainless bolt
Line 64: Line 66:
 You can then place the cap on top of the PVC pipe.  No PVC adhesive is necessary. ​ The ball mount gives you 3 degrees of easy adjustment. You can then place the cap on top of the PVC pipe.  No PVC adhesive is necessary. ​ The ball mount gives you 3 degrees of easy adjustment.
  
 +{{wiki:​image_519b.jpg?​600}}
  
  
wiki/simple_outdoor_enclosure_mounting.txt ยท Last modified: 2021/11/06 17:17 by vizycam