This is an old revision of the document!
Squirrels in particular love to munch on birdseed and they will drive you nuts with their combination of intelligence and persistence, making it nearly impossible to keep them away from your birdfeeder. Luckily, you have Vizy to help you defend your birdfeeder from these unwanted guests.
This guide will describe how to set up a “squirt defense” system for your birdfeeder.
Materials you will need:
Start by measuring out the length of wire and strip the ends. Attach the wires of one end to pins 2 and 4 of a terminal connector as shown (12V and B0). The polarity of the two wires does not matter.
At this point, you can test your sprinkler value. It will make a satisfying click when it engages. You can fire up the Birdfeeder app and click on the Defend button to verify before deploying. Note, sprinkler valves are rated for 24V AC. We are driving it with 12V DC. Most valves should engage at 12V DC. For example, the 3/4” Orbit valve that we recommend works well at 12V DC.
The assembly of such a contraption is fairly self-explanatory. Just pay attention to some details:
Mounting the assembly to a PVC pipe with some hose clamps is also a nice solution. You can angle-cut the PVC pipe (see below), which makes it easy to drive into the ground and stay where you want it.