Differences

This shows you the differences between two versions of the page.

--- wiki:setup_birdfeeder_defense [2021/11/06 15:40]
vizycam
+++ wiki:setup_birdfeeder_defense [2021/11/06 15:43]
vizycam
@@ Line 39: / Line 39: @@
   * The arrows on the sprinkler valve indicate the direction of water flow.  You want the water to flow towards the spray nozzle.
   * The interface between the hose/adapter and adapter/sprinkler valve at the bottom of the assembly will be at full water pressure and may need to be sealed with Teflon tape to prevent them from leaking.  Just wrap the threads with tape before tightening.
-  * The sprayer nozzle will need to strike its target, so pay attention to where it's pointing and how you are mounting it (height, angle, etc.)  You can turn the coil 1/4 turn to open the valve for testing.
+  * The sprayer nozzle will need to strike its target, so pay attention to where it's pointing and how you are mounting it (height, angle, etc.)  You can turn the actuator (the black thing) on the valve 1/4 turn to open the valve for testing.
-  * You need to hook the other end of the garden hose to your spigot and turn it on. :-)
+  * You need to hook the other end of the garden hose to your spigot and turn it on for it to work. :-)
 {{wiki:image_503.jpg?600}}

Documentation