This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision Last revision Both sides next revision | ||
wiki:powering_vizy [2021/10/08 08:50] vizycam [Powering Vizy through the USB-C connector] |
wiki:powering_vizy [2022/02/17 09:57] vizycam [Powering Vizy through the I/O connector] |
||
---|---|---|---|
Line 16: | Line 16: | ||
* Vizy's internal 5V switching power supply can supply up to 6A and operates at 90% efficiency. The 5V supply is used to power the Raspberry Pi, the [[wiki:pinouts|5V output]], and the USB ports. The sum of all these currents should not exceed 6A. | * Vizy's internal 5V switching power supply can supply up to 6A and operates at 90% efficiency. The 5V supply is used to power the Raspberry Pi, the [[wiki:pinouts|5V output]], and the USB ports. The sum of all these currents should not exceed 6A. | ||
* The power input connector is reverse-polarity protected. | * The power input connector is reverse-polarity protected. | ||
- | * The power input connector is compatible with a [[https://www.digikey.com/en/products/detail/cui-devices/PP3-002C/992138|3.5mm outder diameter barrel connector with 1.1mm inner diameter]] | + | * The power input connector is compatible with a [[https://www.digikey.com/en/products/detail/cui-devices/PP3-002C/992138|3.5mm outer diameter barrel connector with 1.1mm inner diameter]] |
===== Powering Vizy through the USB-C connector ===== | ===== Powering Vizy through the USB-C connector ===== | ||
Line 37: | Line 37: | ||
You can also power Vizy through the I/O connector, which can be convenient since the [[wiki:pinouts|I/O connector]] terminal blocks are easy to use. The disadvantage is that you lose the [[wiki:pinouts|12V output]] for the time being (the 12V output is designed to also be a power input.) To power Vizy through the [[wiki:pinouts|I/O connector]] hook the negative side of the supply to one of the Ground pins (pin 1 or 8) and the positive side to the 12V output (pin 2). The same conditions apply to this method as apply to powering Vizy through the power input connector, including reverse-polarity protection. | You can also power Vizy through the I/O connector, which can be convenient since the [[wiki:pinouts|I/O connector]] terminal blocks are easy to use. The disadvantage is that you lose the [[wiki:pinouts|12V output]] for the time being (the 12V output is designed to also be a power input.) To power Vizy through the [[wiki:pinouts|I/O connector]] hook the negative side of the supply to one of the Ground pins (pin 1 or 8) and the positive side to the 12V output (pin 2). The same conditions apply to this method as apply to powering Vizy through the power input connector, including reverse-polarity protection. | ||
- | For example, if you have a 12V battery, you can easily wire it into Vizy's I/O connector and be up and running quickly. | + | For example, if you have a 12V battery or power source, you can easily wire it into Vizy's I/O connector and be up and running quickly. |
| | ||