This is an old revision of the document!
Table of Contents
ReImage Vizy
<introduction blurb>
Four Steps
1. Download latest Vizy Image for here Vizy Image
2. Retrieve microSD card
3. Image the sd card using software
4. Reinsert MicroSD to Vizy and Update via Web Interface
*note*: Update when connected to reliable internet. Errors can occur when updating from unreliable internet, non-ethernet connections especially *
Steps Expanded
Retrieve MicroSD Card
- unscrew four screws at bottom of Vizy –> image : Vizy updside down, arrows to screws
- use Vizy screwdriver, philips side –> image : image of screwdriver
- carefully remove microSD card by either lifting Vizy from case or from where it is. Careful of damage by lifting. The camera cable is here.
– * close up –> image : camera cable connection
– * close up –> image : full removal
ReImage MicroSD Card
- prepare microSD card : microSD to SD converter, SD to USB
– * close up –> image : microSD to SD converter
– * close up –> image : SD to USB
- recommend offical RaspberryPi Imager
- use pi imager to select customer image and usb for card.
- carefully remove after writing is complete
Reinsert to Vizy
- replace microSD in Vizy and carefully rebuild Vizy, don't forget the screws
- * connect to reliable internet and update
