This is an old revision of the document!
<introduction blurb>
1. Download latest Vizy Image for here (link)
2. Retrieve microSD card –> image : Vizy guts, upside down, bottom removed
3. Image the sd card –> image : image options
4. Reinsert to vizy
- * update when connected to reliable internet *
– * errors can occur when updating from unreliable internet, non-ethernet connections especially *
- unscrew four screws at bottom of Vizy –> image : Vizy updside down, arrows to screws
- use Vizy screwdriver, philips side –> image : image of screwdriver
- carefully remove microSD card by either lifting Vizy from case or from where it is. Careful of damage by lifting. The camera cable is here.
– * close up –> image : camera cable connection
– * close up –> image : full removal
- prepare microSD card : microSD to SD converter, SD to USB
– * close up –> image : microSD to SD converter
– * close up –> image : SD to USB
- recommend offical RaspberryPi Imager
- use pi imager to select customer image and usb for card.
- carefully remove after writing is complete
- replace microSD in Vizy and carefully rebuild Vizy, don't forget the screws
- * connect to reliable internet and update